Johnson Pump F5 Neoprene Threaded Impeller Kit 09-1027BT
- Brand:
- Johnson Pump
- Part no:
- 09-1027BT
Image: Fisheries Supply
Where to buy
Specifications
- Material
- Neoprene
- Blades
- 12
- Outside diameter
- 2.25 in
- Depth (width)
- 1.24 in
- Pumps it fits
- F5
This is a Johnson Pump neoprene impeller kit for the F5 pump. It has 12 blades, a 2.25 inch outside diameter and a 1.24 inch width, and it fits a 5/8 inch shaft. The maker builds its impellers for maximum flow and long life. Neoprene is the material here, and the kit is a threaded design. No Jabsco equivalent number is given for this one, so the Johnson part number is the one to go by.
Our take
With 12 blades on a 2.25 inch neoprene impeller, this kit is aimed at flow through an F5 pump, and the maker pitches it on maximum flow and long life. It lists no Jabsco cross reference number, so match the part number to your pump.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.