Johnson Pump F5 MC97 Flexible Impeller, 09-1027B-10
- Brand:
- Johnson Pump
- Part no:
- 09-1027B-10
Image: Fisheries Supply
Where to buy
Specifications
- Material
- MC97
- Blades
- 12
- Outside diameter
- 2.25 in
- Depth (width)
- 1.24 in
- Pumps it fits
- F5
This is the Johnson Pump MC97 flexible impeller for the F5 pump, part number 09-1027B-10. It is made of MC97 material and has 12 blades. It measures 2.25 inches across and 1.24 inches wide, so check those two sizes against the worn impeller you are replacing. Johnson Pump says its impellers are built for maximum flow and long life.
Our take
At 2.25 inches across and 1.24 inches wide with 12 blades, this impeller is sized for the F5 pump, so those two measurements are what to compare against the worn one you pull out. The material is MC97.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.