Johnson Pump 09-810B-1 F4 MC97 Impeller Kit
- Brand:
- Johnson Pump
- Part no:
- 09-810B-1
Image: Fisheries Supply
Where to buy
Specifications
- Material
- MC97
- Blades
- 6
- Outside diameter
- 2 in
- Depth (width)
- 0.87 in
- Shaft
- 0.47 in
- Pumps it fits
- F4
This Johnson Pump 09-810B-1 is a flexible impeller kit in MC97 material for the F4 pump, with a 0.47" shaft. The impeller is 2" in diameter and 0.87" wide, and it is listed as a replacement for Jabsco 18653-0001. Johnson makes its impellers for maximum flow and long life, and a worn or damaged impeller can lead to system failure or engine breakdown.
Our take
Sized at 2" across and 0.87" wide with a 0.47" shaft, this MC97 impeller is listed as a replacement for Jabsco 18653-0001 in F4 pumps. Check those dimensions and that part number against your old impeller before swapping.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.