Jabsco Quiet Flush E2 Marine Toilet, Fresh Water, 24V DC
- Brand:
- Jabsco
- Part no:
- 38045-4194RSP
Image: Fisheries Supply
Where to buy
Specifications
- Flush
- Electric
- Flush water
- Freshwater
- Voltage
- 24V
- Macerator
- Yes
- Footprint
- 14.4"H x 14.8"W x 18.9" D
The Jabsco Quiet Flush E2 is an electric marine toilet with a touch panel offering eco flush, full flush and empty functions. In eco mode it uses 1 litre (1 quart) per flush. It is built for wet room installations. The regular bowl measures 14.4"H x 14.8"W x 18.9" D. The discharge port can be straight or 90°. A C-clip releases the pump assembly from the base without tools, so pump servicing is quick. The freshwater version has a double check valve to guard the potable supply.
Our take
Eco mode uses only 1 litre (1 quart) per flush, so each flush takes a single litre from the onboard fresh supply. The C-clip pump release needs no tools, so servicing the pump takes little effort.
From our buying guide
A vessel with installed toilet facilities must have an operable marine sanitation device that is labeled or certified. EPA says untreated sewage may not be discharged within three miles from shore, and in a No Discharge Zone treated sewage may not be either.
Check before you buy:
- You have what it needs, since heads may call for 12-volt power, through-hulls and seacocks, or a separate vacuum source.
- It fits the compartment, since Jabsco says an electric toilet needs more space at the rear than a manual one.
- If it could sit below the waterline, you'll fit a vented loop as the maker specifies, since Jabsco warns the vent, not the loop, is what stops the siphon.

