Jabsco Impeller Kit 50461-1001-P
- Brand:
- Jabsco
- Part no:
- 50461-1001-P
Where to buy
Specifications
- Pumps it fits
- PCM 5.7L, PCM 6.0L
This is a Jabsco impeller kit, sold under part number 50461-1001-P and carrying the PCM reference R061022. It is a replacement part for the PCM 5.7L and PCM 6.0L pumps. The maker's description is brief and gives no dimensions, blade count or material, so check your pump model against the two named here before you pull anything apart. The kit is the impeller replacement for those pumps and nothing more is stated about it.
Our take
The kit is named for two pumps only, the PCM 5.7L and the PCM 6.0L. Read the model off your pump before you open it up, because those two names are all the fitment information given and nothing else is stated about other Jabsco pumps.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.