Jabsco 50410-1201 Flange Mount Engine Cooling Pump
- Brand:
- Jabsco
- Part no:
- 50410-1201
Image: Powerboat Supply
Where to buy
Specifications
- Pumps it fits
- 454 C.I. Chevrolet block
A flange-mount engine cooling pump from Jabsco with a bronze body, a neoprene impeller and a 316 stainless steel shaft. The port is a 1-1/4 inch hose barb, and the unit weighs 5 lb. It moves 14 gallons per minute at 1500 rpm and primes from dry up to 2.4 m (7.8 ft). It has single row ball bearings, and no wearplate is fitted.
Our take
Flange mounting and a rating of 14 gallons per minute at 1500 rpm mark this as a bolt-on engine cooling pump. Bronze with a 316 stainless shaft suits a marine setting, and the 1-1/4 inch barb port connects straight to hose.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.