Jabsco 23095-0007-P Replacement Impeller, Red
- Brand:
- Jabsco
- Part no:
- 23095-0007-P
Image: Powerboat Supply
Where to buy
View on Amazonpaid link
Specifications
- Pumps it fits
- Ballast King
This is a Jabsco replacement impeller in red, carrying the number 230950007P and made to fit the Ballast King pump. Its job is to be swapped in for a worn impeller in that pump. No blade count, diameter, width or material is given for this part, so compare your existing impeller and your pump model before you rely on it.
Our take
The Ballast King fit defines this red replacement impeller: it is meant as a direct swap in that pump. Match it to the pump model on your boat and keep your old impeller beside it when you compare.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.