First Mate 400 GPH 12V Submersible Bilge Pump
- Brand:
- Johnson Pump
- Part no:
- JP-21405
Image: www.spxflow.com
Where to buy
Specifications
- Rated flow
- 475 gal/h
- Outlet
- 19 mm
- Voltage
- 12V
- Current draw
- 2.5 A
The Johnson Pump First Mate 400 GPH 12V, part number JP-21405, is a submersible bilge pump for 12 V boats. The maker rates it at 475 GPH (30 l/min) at 13.6 V. It draws 2.5 A and is protected by a 5 A fuse, so it asks little of your battery and wiring. The hose connection is 3/4 inch (about 19 mm). The body is compact: 115 mm across at its widest, 100 mm tall, and 0.35 kg. That makes it easy to fit in a tight bilge sump. The maker says it is extremely tolerant to low battery voltage because of its low power consumption, which counts when the bilge pump is running off a tired battery.
Our take
This suits a small to mid-size boat that wants a modest, low-draw 12 V bilge pump, especially where battery capacity is limited. Treat 475 GPH as a best case, since the maker rates it at 13.6 V and a 12 V system will see less. Check that your hose and fitting match the 3/4 inch connection. If you need serious flow for a big or leaky hull, look at a larger pump.
From our buying guide
Rule and Johnson both say their bilge pumps are not intended for damage control. Flow falls as the discharge head rises, and the length of the hose, its bends and any check valve reduce it further.
Check before you buy:
- The maker's own table shows the flow at head, since how much a pump loses depends on the model.
- An automatic pump also has a manual switch, which ABYC's voluntary 2005 standard calls for.
- You'll fuse it to the maker's figure.
