Skipper's Locker

EPEVER Tracer6415AN 60A MPPT Solar Charge Controller

Brand:
EPEVER
Part no:
Tracer6415AN

Where to buy

Specifications

Type
Mppt
Battery voltages
12/24/36/48 V DC or auto
Charge current
60 A
Maximum panel voltage
150 V
Ingress rating
IP20

The EPEVER Tracer6415AN is a 60A MPPT solar charge controller. It handles 12, 24, 36 and 48 V DC systems, or it can pick the system voltage automatically. Rated charging power is 750 W at 12 V, 1500 W at 24 V, 2250 W at 36 V and 3000 W at 48 V. The maker gives MPPT tracking efficiency as 99.5% or higher. On the solar side, maximum PV open-circuit voltage is 150 V at the lowest temperature and 138 V at 25C. Battery settings cover Sealed (the default), GEL, flooded and user-defined lead-acid, plus LiFePO4 and Li(NiCoMn)O2 lithium. Communication is RS485 through two RJ45 ports wired in parallel. Bluetooth is not built in. It needs an optional external module connected by network cable. The unit measures 340 x 236 x 119 mm, weighs 4.5 kg, has an IP20 enclosure, and is rated for -25C to +60C.

Our take

This suits a dry, ventilated spot below decks where you need a big controller for a 48 V bank or a large array on a 12 to 48 V system. Skip it for anything exposed to spray: IP20 means no protection from water. Power drops from 45C up, so give it airflow, and never seal it in with flooded batteries. The maker's notes do not mention boat use.

From our buying guide

NMMA says charging sources must meet the charging profile the battery maker recommends. A charger's presets are its own maker's, so set it from the battery maker's figures.

Check before you buy:

  • It can follow your battery's profile, since not every charger can follow a lithium maker's.
  • On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.

See all solar controllers

Sources