EPEVER Tracer2210AN MPPT Solar Charge Controller
- Brand:
- EPEVER
- Part no:
- Tracer2210AN
Where to buy
Specifications
- Type
- Mppt
- Battery voltages
- 12/24V auto (battery input 8-32V)
- Charge current
- 20 A
- Maximum panel voltage
- 100 V
- Maximum panel power
- 260W/12V, 520W/24V
- Ingress rating
- IP30
The EPEVER Tracer2210AN is an MPPT solar charge controller rated for 20A of charge current. It detects 12V or 24V systems automatically and accepts a battery input of 8 to 32V. The maker lists lead-acid and lithium-ion batteries as supported, and names Solar Boat among the uses for the Tracer AN series. For sizing, rated charge power is 260W at 12V and 520W at 24V. Maximum PV open-circuit voltage is 100V at the minimum operating temperature and 92V at 25C, with an MPP voltage range from battery voltage plus 2V up to 72V. Tracking efficiency is 99.5% or better and conversion efficiency tops out at 98.0%. It measures 220 x 154 x 52 mm, weighs 0.94 kg, and works from -25C to +45C. The enclosure is IP30, and communication is RS485 (RJ45) with Modbus.
Our take
This suits a small 12V or 24V boat system with a modest panel array and a dry, protected spot to mount it, such as inside a cabin locker. The IP30 enclosure is not weatherproof, so keep it out of the weather and spray. At 12V it caps panel input around 260W. The datasheet lists RS485 Modbus only and no Bluetooth, so skip it if you want phone monitoring.
From our buying guide
NMMA says charging sources must meet the charging profile the battery maker recommends. A charger's presets are its own maker's, so set it from the battery maker's figures.
Check before you buy:
- It can follow your battery's profile, since not every charger can follow a lithium maker's.
- On a boat subpart I covers, each ungrounded output conductor from a battery needs a manually reset, trip-free circuit breaker or fuse within 72 inches of the battery.
