Blue Sea Systems SI-ACR Automatic Charging Relay, 12/24V 120A
- Brand:
- Blue Sea Systems
- Part no:
- 7610
Image: www.fisheriessupply.com
Where to buy
Specifications
- Type
- Relay combiner
- Continuous rating
- 120 A
- System voltage
- 12/24 V auto-ranging
- Ignition protection
- Yes
- Ingress rating
- IP67
The Blue Sea Systems SI-ACR (model 7610) is an automatic charging relay that links two battery banks while charging and keeps them apart when they should be separate. The input auto-ranges, so the same unit works on 12 V or 24 V systems. It is rated for 120 A continuous and 210 A intermittent for 5 minutes, and that rating assumes 1/0 AWG cables. Start isolation separates the batteries during engine cranking to protect sensitive electronics. Low-voltage protection stops a charged battery being combined with a drained one. It is ignition protected, so it is safe to install aboard gasoline-powered boats, and it carries an IP67 rating, with temporary immersion for 30 minutes.
Our take
This suits a boat that needs a relay-style combiner between a start and house bank on 12 V or 24 V, gasoline included. The start isolation and low-voltage protection are what you want from one. Plan on 1/0 AWG cable, because the 120 A rating depends on it. If you need more than 120 A continuous, look at a larger unit.
From our buying guide
NMMA says not to mix battery chemistries or types in the same bank, and the makers add their own limits.
Check before you buy:
- Each maker sets its own alternator rules. Battle Born calls a DC-to-DC charger a simple and safe way to use alternator charging.
- Battle Born warns that a BMS shutdown leaves the vessel without power, and that one during alternator charging can severely damage the alternator.
- Ignition protection on a charger or switch is the maker's statement, so read what it says and which standard it names.
