Skipper's Locker

Airmar P19 Depth Thru-Hull Transducer 31-338-1-01

Brand:
Airmar
Part no:
31-338-1-01

Where to buy

Specifications

Mount
Thru-hull
Frequency
200
Cone angle
11 deg
Max depth
213 m

The Airmar P19, part number 31-338-1-01, is a thru-hull depth transducer. It mounts through the hull in an approximate 2 inch diameter cutout, and it comes with a 30 foot cable to reach your sounder. It operates at 200 kHz and is rated at 350 watts, with a beam of 11 degrees and a maximum depth range of 700 feet. Those four figures are the ones to match against your sounder's requirements: frequency, power, beam and depth. The 30 foot cable length and the 2 inch hole size are worth checking against your hull layout before you order.

Our take

This suits a boat that wants a fixed, through-hull 200 kHz depth transducer and has a sounder that works with 350 watts at that frequency. Skip it if you want a transducer that goes on without cutting a hole of about 2 inches in the hull. Its main limit is that it is a single-frequency, 11 degree beam unit.

From our buying guide

Raymarine's general guidance is 200 kHz for water under about 60 m (200 ft) and 50 kHz for deep water. In-hull transducers avoid a hole, but lose performance and need a solid fiberglass bottom.

Check before you buy:

  • The housing suits your hull. Airmar and Raymarine rule out plastic on a wood hull and bronze on a metal one.
  • It connects to your display, since an analog transducer needs an interface.
  • A through-hull will be fitted to the maker's guide. Garmin says its own should be installed by a qualified marine installer.

See all depth transducers

Sources