Skipper's Locker

TotalBoat AlumiPaint AF Copper-Free Antifouling Paint

Brand:
TotalBoat

Where to buy

Specifications

Volume
Quart or gallon
Type
Copper-free self-polishing antifouling (ablative)
Suits hull
Properly prepared aluminum, steel and iron, below the waterline
Waters
Brackish, fresh and salt water

AlumiPaint AF is a copper-free ablative antifouling paint for properly prepared aluminum, steel and iron hulls. It is rated for brackish, fresh and salt water, and it goes below the waterline only. It comes in quart and gallon sizes, in black or blue. This listing is the black quart. The maker rates coverage at 125 square feet per quart and 500 per gallon. The biocides are zinc pyrithione at 4.8% and tralopyril at 6.0%. Apply it between 50 and 90F. Launch dry time is 2 hours at 90F, 4 hours at 70F or 8 hours at 50F, and there is no maximum dry time before launching. Protection is rated for a single season. Do not apply it over tin, vinyl or Teflon bottom paints.

Our take

A sensible pick for an aluminum or steel boat that needs a copper-free bottom paint, in fresh, brackish or salt water. The lack of a maximum dry time helps if you haul and relaunch in season. Plan on repainting every year, since the maker rates it for one season. Skip it if the hull carries tin, vinyl or Teflon bottom paint, or if you can't paint between 50 and 90F.

See all bottom paint

Sources