ST Blade Fuse Block, 6 Circuits with Negative Bus and Cover
- Brand:
- Blue Sea Systems
- Part no:
- 5025
Image: www.fisheriessupply.com
Where to buy
Specifications
- Circuits
- 6 circuits with negative bus
- Fuse type
- ATO and ATC blade fuses
- Rating
- 100 A per block, 30 A per circuit, 32 V DC max
The Blue Sea Systems 5025 is a six-circuit ST blade fuse block with a negative bus and a clear insulating cover. It takes ATO and ATC fast-acting blade fuses rated 1 to 30 amps, so it covers most small branch circuits on a boat. The block is rated 100 A overall and 30 A per circuit, at a maximum of 32 V DC. The negative and positive buses use #10-32 studs. The screw terminals are #8-32 with captive star lock washers, and Blue Sea gives a torque of 15 in-lb. The base is reinforced polycarbonate and the cover is polycarbonate. The cover meets ABYC and USCG insulation requirements and has a recess for a small label, so you can mark each circuit. Fuses are sold separately.
Our take
This suits anyone wiring up to six branch circuits on a 12 V or 24 V boat, such as electronics, pumps or lights, where each circuit stays at or under 30 A. Skip it for heavier loads or anything above 32 V DC. The main limit is the 100 A total per block, so check your combined load. Fuses are not included.
