Sikaflex-292i White 300 ml Cartridge, Marine Polyurethane Adhesive
- Brand:
- Sika
Image: irl.sika.com
Where to buy
Specifications
- Type
- 1-component moisture-curing polyurethane, non-sag, structural bonding adhesive
- Volume
- 300 ml
- Cure time
- Skin time 40 minutes; open time 30 minutes (23 °C, 50% r.h.); cures by moisture, slower at low temperature
Sikaflex-292i is Sika's multipurpose marine adhesive, a one-component polyurethane that cures by reacting with moisture in the air. This is the white 300 ml cartridge. It is a non-sag structural bonding adhesive, and Sika says it suits structural joints in marine construction that face high dynamic stress. It meets the IMO low spread of flame requirements. Apply it between 10 and 40 °C (50 to 104 °F). At 23 °C and 50% relative humidity, skin time is 40 minutes and open time is 30 minutes; it cures more slowly when cold. Cured, it has a Shore A hardness of 40 and tensile strength of 3 MPa (430 psi), and the service range is -50 to 90 °C. Shelf life is 12 months stored below 25 °C.
Our take
This suits a boatbuilder or an experienced hand bonding structural joints that flex and need a paintable, gap-filling bond, provided you test on the actual substrate first. Sika limits it to experienced professional users and warns about materials prone to stress cracking, so a first-time DIYer wanting a casual fix should look elsewhere. With a 12-month shelf life, buy only what you will use.
See all sealants and adhesives
