Skipper's Locker

Sikaflex-291 LOT Long Open Time Marine Sealant

Brand:
Sika
Part no:
90927

Where to buy

Specifications

Type
1-component polyurethane, moisture-curing, non-sag marine adhesive/sealant
Volume
300 ml (10.1 fl oz) cartridge
Cure time
Skin time 4 hours at 23 C / 50% RH; full cure depends on curing speed diagram (Sika does not state a full cure time in text)
Above or below water
Above and below the waterline

Sikaflex-291 LOT is a non-sag, one-component polyurethane adhesive and sealant developed for the marine market. It cures on exposure to atmospheric moisture and can be used above and below the waterline. Sika's use description covers bedding of teak plank decking, where a long working time matters. This is the black 300 ml (10.1 fl oz) cartridge, part number 90927. It also comes in white and mahogany. The figures that matter: skin time is 4 hours at 23 C (73 F) and 50 percent humidity. Sika gives full cure only as a diagram, not a time. Tensile strength is 1.3 MPa (190 psi), elongation at break is 550 percent, and Shore A hardness is 45. Service range is -40 to 90 C (-40 to 194 F). Apply it between 5 and 40 C (41 to 104 F). Shelf life is 12 months stored below 25 C.

Our take

This suits a boatowner with a long deck or large joint to bed, where the extra working time lets you set things up without a race. Skip it for Plexiglass or polycarbonate, which Sika says it must not seal. Sika also calls it a product for experienced professional users and wants adhesion tested on your actual substrates first. Cold weather work is the other limit: application stops at 5 C.

See all sealants and adhesives

Sources