Skipper's Locker

Sikaflex-291 Black 300 mL Polyurethane Sealant

Brand:
Sika
Part no:
90923

Where to buy

Specifications

Type
1-component polyurethane, moisture-curing, non-sag
Volume
300 mL (10.1 fl oz) cartridge
Above or below water
Above or below the waterline

Sikaflex-291 is a non-sag, one-component polyurethane sealant developed for the marine market. It cures by reacting with moisture from the air, and it can be used above or below the waterline. This is the black 300 mL (10.1 fl oz) cartridge, Sika part 90923. The maker states it meets International Maritime Organisation requirements. The figures that matter: skin time is 60 minutes and open time 45 minutes at 23 °C and 50 % humidity, and you can apply it between 5 and 40 °C. Cured, it has a Shore A hardness of 40, 1.8 MPa tensile strength and 500 % elongation at break, so the joint stays elastic. Service range is -50 to 90 °C continuous. It resists fresh water and seawater, but fuels and oils only temporarily. Shelf life is 12 months.

Our take

Buy it if you are a professional, or work to professional standards, on flexing, vibrating joints above or below the waterline, and you will trial it on your actual substrates first. Skip it for Plexiglas or polycarbonate, which can stress crack. Its main limit is permanence: once cured it comes off only mechanically, and paint over it may crack.

See all sealants and adhesives

Sources