Shurflo Blaster II Washdown Kit, 12 V, 3.5 GPM
- Brand:
- Shurflo
- Part no:
- 4338-121-E07
Image: www.pentair.com
Where to buy
Specifications
- Voltage
- 12 V DC
- Flow
- 3.5 GPM (13.2 LPM) rated; typical 3.7 GPM at 0 PSI, 2.0 GPM at 30 PSI
- Pressure
- 45 PSI shut-off (3.1 bar); restart 30 PSI; 30 PSI max inlet
The Shurflo Blaster II washdown kit, aftermarket part 4338-121-E07 (the maker's OEM number is 4338-121-A07), is a 12 V DC four-chamber diaphragm pump with 1/2-14 NPSM male ports. It is made for fresh or salt water deck washdown and can also move water for general transfer. The motor is permanent magnet, rated for intermittent duty, with thermal overload protection and automatic restart. It is rated at 3.5 GPM, and the maker's curve shows 3.7 GPM at 0 PSI falling to 2.0 GPM at 30 PSI and 1.8 GPM at 40 PSI. Current draw climbs from 3.0 A to 5.8 A at 30 PSI, and the sheet recommends a 10 amp fuse. Shut-off is 45 PSI, restarting at 30 PSI. It self-primes from 6 feet, runs dry, takes up to 30 PSI at the inlet and handles liquid up to 130 F (54 C).
Our take
This suits a boat that needs a washdown pump for short jobs on deck. Skip it for continuous duty or a pressurised supply, since it is intermittent-rated with a 30 PSI inlet limit. The 3.5 GPM figure only holds at low pressure. Saltwater is the reported weak spot, with shorter life and corrosion. The data sheet lists two pump model numbers, so check the box.
