Skipper's Locker

Rust-Oleum Boat Bottom Antifouling Paint, Blue, 1 Quart

Brand:
Rust-Oleum
Part no:
207013

Where to buy

Specifications

Volume
1 quart (32 fl oz) per can
Type
Hard antifouling, modified epoxy
Suits hull
Fiberglass and wood (not aluminum hulls or outdrives)

Boat Bottom Antifouling Paint from Rust-Oleum Marine Coatings is a hard antifouling paint on a modified epoxy resin, pigmented with carbon black and cuprous oxide. This is the blue 1-quart can (SKU 207013, 32 fl oz). It can go over most aged hard antifouling coatings and suits fiberglass and wood hulls. Recommended dry film thickness is 2.0 mils per coat, and a quart covers about 110 sq. ft. in practice. Apply two coats for the best protection. At 70-80F and 50% relative humidity you can recoat in 4 hours and launch in 16. VOC is 440 g/l maximum. The cuprous oxide content is high and it settles, so mix the can thoroughly before use. Do not use it on aluminum hulls or outdrives.

Our take

A sound choice for a fiberglass or wood hull that needs a hard antifouling coat, especially over an existing hard coating. Skip it for aluminum hulls and outdrives, and keep it off drive units. Its main limit is fussy application: apply only at 50-90F with humidity below 85%, and check the hull monthly for growth, since extreme water temperatures, silt, oil and brackish water can damage antifouling paint.

See all bottom paint

Sources