Skipper's Locker

PSS Type A Shaft Seal, 1 in Shaft (02-100-134)

Brand:
PSS Shaft Seal
Part no:
02-100-134

Where to buy

Specifications

Shaft size
1 in
Tube size
1-3/4 in to 1-7/8 in stern tube OD

The PSS Type A is a dripless, packless shaft seal from PYI. This one, part number 02-100-134 (SKU 48014), fits a 1 in propeller shaft and a stern tube with an outside diameter of 1-3/4 in to 1-7/8 in. It is a mechanical face seal: a carbon/graphite stator, lapped to 4 HLB, runs against a 316 stainless steel rotor, with Nitronic 50 available as an option. Check the fit figures before you order. The rotor outside diameter is 2.375 in. The seal assembly is 6.75 in long uncompressed and compresses about 3/4 in when installed. Temperature limits run from 5 F to 225 F (-15 C to 107 C), and the shaft speed limit is 10,000 RPM. Type A is the standard-duty seal, designed for propeller shafts from 3/4 in to 3-3/4 in in diameter.

Our take

This suits a boat with a 1 in shaft and a 1-3/4 to 1-7/8 in stern tube where you want to get rid of a dripping packing gland. Measure the tube first, since the range is narrow. Its main limit is that Type A is the maker's standard-duty seal, so look elsewhere if you want something rated for heavy duty.

See all shaft seals

Sources