Skipper's Locker

PSS Type A Shaft Seal, 1-1/8 in Shaft, 1-3/4 in Tube

Brand:
PSS Shaft Seal
Part no:
02-118-134

Where to buy

Specifications

Shaft size
1-1/8 in
Tube size
1-3/4 to 1-7/8 in

The PSS Type A, part number 02-118-134, is a shaft seal built for a 1-1/8 in propeller shaft. It fits a stern tube with an outside diameter of 1-3/4 to 1-7/8 in, and it is listed for both sail and power boats. The figures that decide whether it fits: 6.75 in uncompressed seal length, a 1.5 in stern tube cuff, and a 2.375 in rotor outside diameter. The rotor is 316 stainless steel as standard, with Nitronic 50 as an option. The stator is carbon/graphite, lapped to 4 HLB flatness, and the bellows are molded nitrile-PVC. The seal is listed as ABS, RINA and Bureau Veritas certified.

Our take

This suits a boat with a 1-1/8 in shaft and a 1-3/4 to 1-7/8 in stern tube, especially if you want a seal with ABS, RINA and Bureau Veritas certification behind it. It is no use on any other shaft or tube size. Measure the room for the 6.75 in uncompressed length and 2.375 in rotor before ordering, and check PSS's operating limits against your shaft speed.

See all shaft seals

Sources