Polyform F-3 Twin-Eye Fender, 8.2 x 30 in, White
- Brand:
- Polyform
- Part no:
- 83518187
Where to buy
View on Amazonpaid link
Specifications
- Diameter x length
- 8.2 in x 30 in
- Eye diameter
- 0.9 in
A twin-eye fender that Polyform says can hang vertically or horizontally and designs for permanent unprotected moorings, pilings, locks and concrete walls. Polyform gives it as 8.2 x 30.0 in and 5.3 lb, with a 0.9 in eye, for 20 to 30 ft boats. It says to inflate to 2.1 lb (0.15 bar), no more than 2 PSI from a compressor, and to use the largest line the eye takes; its chart gives 3/8 in, doubled or looped. Polyform's cover for it is the EFC-03.
From our buying guide
Polyform says to use at least three fenders when docking, and Taylor Made's rule of thumb is one for every 10 ft of waterline per side. Both makers hedge their size charts, so allow for your boat and where you moor.
Check before you buy:
- The size is on that maker's own chart for your boat's length.
- Your fender line suits the eye, since Polyform says too small a line can cut through a vinyl eye.
- You'll inflate it to the maker's figure, since two makers say over-inflating voids the warranty.

