Skipper's Locker

Jabsco Sensor-Max II Variable Speed Freshwater Pump

Brand:
Jabsco
Part no:
V50AJ-115N-3A

Where to buy

Specifications

Flow
19 L/min
Pressure
40 psi
Voltage
12V
Variable speed
Yes
Outlets supported
5
Current draw
12 A
Port size
1/2 in (13 mm) and 3/4 in (19 mm) hose barbs, straight and elbow

Jabsco's variable-speed freshwater pump (V50AJ-115N-3A): a pressure sensor sets the motor speed instead of a pressure switch cycling it on and off, and Jabsco rates it at 5 GPM open flow at 12 V and says it supplies up to five outlets. It draws up to 12 A at 40 psi and needs a 15 A fuse, not included. Jabsco says it eliminates the need for an accumulator, and that its accumulators must not be used with variable-speed pumps.

Our take

A good fit for a 12 V freshwater system with up to five outlets where you want steady pressure without an accumulator tank. The maker says it holds pressure until demand stops, and it self-primes to 8 ft dry. Skip it for 24 V or 115 V boats. The main limit is intermittent duty, so it is not for long continuous runs. Budget for 12 A draw and a 15 A fuse that is not in the box.

From our buying guide

Size a freshwater pump by the outlets that must run at once. Jabsco's rule of thumb is 1 GPM per outlet, and the listed flow is open flow, which falls as pressure rises.

Check before you buy:

  • The data sheet shows flow at pressure. One Shurflo gives 4.0 GPM at 0 psi and 2.0 GPM at 40 psi.
  • You have an inlet strainer, which Jabsco says is required in every freshwater pump installation.
  • An accumulator suits the pump. Jabsco says one cuts cycling on a pressure-switch system, and not to use its accumulators with variable-speed pumps.

See all freshwater pumps

Sources