Skipper's Locker

Jabsco Self-Priming Sealed Macerator Pump, 24V

Brand:
Jabsco
Part no:
18590-2094

Where to buy

Specifications

Voltage
24 V DC
Flow
12 GPM

The Jabsco 18590-2094 is a 24V DC self-priming sealed macerator pump. It draws 8 amps and is rated for 12 GPM. It self-primes to 5 ft when wet, so it can pull from a lift below the waterline or a short vertical run. The inlet takes a 1-1/2 inch hose barb or a 1-1/2 inch male NPT connection, and the outlet is a 1 inch hose barb. Check your existing hoses and fittings against those sizes before you order. It is rated to resist corrosion in harsh salt-water environments, and it complies with USCG Regulation 183.410 and ISO 8846 Marine for ignition protection. The maximum head is not published, so work that out against your own discharge run.

Our take

This suits a 24V boat that needs a sealed, ignition-protected pump with a short lift and a 1-1/2 inch inlet. Skip it on a 12V system, or if your discharge is long or high. The maximum head is not published, so that is the figure to confirm before you buy.

See all macerator pumps

Sources