Jabsco 1210-0001 Neoprene Impeller
- Brand:
- Jabsco
- Part no:
- 1210-0001-P
Where to buy
View on Amazonpaid link
Specifications
- Material
- Neoprene
- Blades
- 12
- Outside diameter
- 2.25 in
- Depth (width)
- 1.25 in
- Shaft
- 0.625 in
- Drive
- Spline
Jabsco lists the 1210-0001 as neoprene, 12 blades, 2-1/4 in in diameter and 1-1/4 in deep, on a 5/8 in shaft with a brass insert, and its cross-reference table lists Volvo, Yanmar, Westerbeke & Universal and Johnson numbers against it. Jabsco says the impeller part number is on the data sheet supplied with the pump, and its 2009 catalogue advises replacing impellers at least once a year, or sooner depending on engine duty.
From our buying guide
The impeller depends on the pump, so find it by the pump's model number. Makers' schedules differ, with some saying every year and others every 300 hours or three years, so go by the one for your engine.
Check before you buy:
- It matches your old one on blade count, shaft diameter, outside diameter, material, drive type and depth.
- You've checked any substitute against the pump housing, since cross-references are the makers' own claims.
- The material suits the job. Jabsco recommends neoprene for engine cooling, and nitrile for bilge pumping and water with oil or diesel.

