Skipper's Locker

Interlux Trilux 33 Antifouling Paint, White, 1 Gallon

Brand:
Interlux
Part no:
YBA068/1

Where to buy

Specifications

Volume
1 gallon (128 fl oz)
Type
Ablative antifouling, hard slow-polishing
Suits hull
Aluminum, fiberglass, wood and other underwater metal; outdrives and outboards; metal must be primed first
Waters
Fresh, salt and brackish

Interlux Trilux 33 is a hard, slow-polishing ablative antifouling paint. The white 1 gallon can carries part number YBA068/1. It is described as a safe and effective antifouling for aluminum boats, outdrives and outboards, and it is marketed for salt, brackish and fresh water. Volume solids is 55 percent, and theoretical coverage is about 440 square feet per gallon by brush, with two coats recommended. It is suited to moderate fouling in warmer waters, and the hardened film is described as suitable for high speed powerboats. Metal surfaces, aluminum included, must be properly primed before you apply it.

Our take

This suits a powerboat or aluminum boat kept in warmer salt, brackish or fresh water with moderate fouling, where a hard, slow-polishing ablative makes sense. Skip it if you expect heavy fouling. Its main limit is that rating for moderate fouling in warmer water. It also is not a bare-metal paint, so budget for primer on aluminum first.

See all bottom paint

Sources