Interlux Trilux 33 Aerosol Antifouling Paint, Gray (YBA064A)
- Brand:
- Interlux
- Part no:
- YBA064A
Image: www.fisheriessupply.com
Where to buy
Specifications
- Volume
- 12 fl oz (maker data sheet; input says 16 oz, unconfirmed)
- Type
- Aerosol antifouling paint, matte finish, 14% volume solids
- Suits hull
- Aluminum outboards, outdrives and aluminum hulls underwater
- Waters
- Fresh, salt and brackish water
Trilux 33 Aerosol is an Interlux antifouling paint in a 12 fl oz spray can, formulated for aluminum outboards, outdrives and aluminum hulls in underwater areas. It is rated for fresh, salt and brackish water. This is the gray, part number YBA064A, with a matte finish. The maker calls for two coats at 2 mils dry per coat. Volume solids are 14% and theoretical coverage is 21.2 ft2 per gallon. Overcoat after at least 6 hours at 73F, and keep the product between 50 and 85 F. Use the entire can for each lower unit; larger units may need more. For best results, pre-prime bare aluminum with an etch primer. It contains biocides, so only wet sand old antifouling, and never dry sand or burn it off. Typical shelf life is 2 years.
Our take
This suits an owner with an aluminum outboard or outdrive lower unit who wants a spray-on coat for fresh, salt or brackish water. It uses two biocides plus Biolux for slime control. The limits: bare aluminum needs an etch primer first, the can must be 50 to 85 F and shaken well or it clogs, and one can covers one lower unit, so larger units cost more.
