Skipper's Locker

Interlux Fiberglass Bottomkote NT Antifouling Paint

Brand:
Interlux
Part no:
YBB379G

Where to buy

Specifications

Type
Hybrid hard/ablative
Suits hull
Fiberglass, wood, properly primed steel or lead; not aluminum
Waters
Brackish, fresh and saltwater

Fiberglass Bottomkote NT is a hybrid hard/ablative bottom paint from Interlux. It is a matte finish that carries a biocide to hold off marine growth, and it is specified for brackish, fresh and saltwater, so it is not limited to one cruising ground. It goes on fiberglass, wood, and properly primed steel or lead, and it suits both power and sailboats. Do not put it on aluminum hulls or outdrives. Plan on at least two full coats, three on bare wood, and add an extra coat if the boat is fast. Theoretical coverage is 400 square feet per gallon. Thin it with Special Thinner 216 or Brush-Ease 433.

Our take

This suits owners of fiberglass or wood boats, power or sail, who want one bottom paint that works in fresh, brackish and salt water. Skip it for aluminum hulls and outdrives, where it does not belong. The main limit is the coat count: two full coats minimum, more for fast boats or bare wood, so buy enough paint to cover that, not just one coat.

See all bottom paint

Sources