Skipper's Locker

Groco BB-1 Flanged Seacock Backing Block

Brand:
Groco
Part no:
BB-1

Where to buy

Specifications

Size
3/4 in and 1 in seacocks (4.29 in diameter)
Thread
5/16-18 threaded inserts

The Groco BB-1 is a backing block for flanged seacocks. It is made for 3/4 in and 1 in seacocks and measures 4.29 inches across. The block is 1/2 inch thick, which is rigid enough for a secure installation. It uses 5/16-18 threaded inserts, and they are bronze. The material will not swell or absorb moisture. It is also pliable enough to conform to slight hull curves, so the seacock flange can seal against a hull that is not perfectly flat. Other block sizes in the range cover other seacock sizes, so check your seacock size before you order.

Our take

This suits anyone fitting a 3/4 in or 1 in flanged seacock who wants a block that will not swell or soak up water and that follows a gentle hull curve. Its main limit is size: it only covers those two seacock sizes. If your seacock is larger or smaller, you need a different block, and a hull with a sharp curve is a poor match for it.

See all seacocks

Sources