Garmin Reactor 40 Hydraulic Autopilot with SmartPump v2
- Brand:
- Garmin
- Part no:
- 010-02794-01
Image: www.garmin.com
Where to buy
Specifications
- Drive
- Hydraulic
Garmin's Reactor 40 for hydraulic steering, with its SmartPump v2 and GHC 50 control head, as part 010-02794-01. Garmin rates SmartPump v2 for steering cylinders of 4 to 24 cu in, and its Shadow Drive sensor suspends autopilot control when someone turns the helm by hand. Hydraulic hoses and fittings are not in the box, and Garmin says a qualified marine installer should fit it, followed by its Dockside and Sea Trial wizards, the second in calm water.
Our take
Worth a look if you steer a hydraulically steered boat and want a pump and autopilot bundle from one maker. The NMEA judges named it a 2021 award winner, citing minimal heading error, course deviation, rudder movement and power consumption. Shadow Drive drops out when the helm is turned and re-engages on a steady course. The SmartPump v2 fits most hydraulic setups, so check yours.
From our buying guide
Raymarine describes a typical autopilot as four parts: a heading sensor, a control unit, a drive and a control head. Bought alone, the parts don't steer, and Raymarine says the operator must stay at the helm at all times.
Check before you buy:
- The box list has the drive and control head you need, since packs can leave out a major part.
- It's rated for your boat the way the maker measures it. Raymarine sizes on fully laden displacement, often 20% above the designed figure.
- On hydraulic steering, the pump's range covers your steering cylinder's volume.

