Skipper's Locker

Blue Sea Systems 285-Series Surface Mount Breaker, 50A

Brand:
Blue Sea Systems
Part no:
7183

Where to buy

Specifications

AC or DC
DC

The Blue Sea Systems 285-Series 7183 is a 50 amp thermal circuit breaker for surface mounting. It is a Type III breaker: switchable, manual reset and trip free. Terminals are M6 studs, torqued to 50 in-lb, and the surface mount takes 1/4 screws. Maximum voltage is 48 V DC, with a 3,000 A interrupt rating at that voltage. No AC rating is stated. It works across -40 C to 85 C and is rated IP67, protected against immersion up to 1 m for 30 minutes. It meets SAE J1171 external ignition protection requirements, which makes it suitable for gasoline-powered boats. Do not use it for direct control of high inrush loads such as motor starting.

Our take

This suits a DC feeder or accessory circuit up to 50 A, especially on a gasoline boat where ignition protection matters or in a wet spot where IP67 helps. Skip it for motor circuits, since it is not made for high inrush loads, and for any AC circuit. It protects one circuit, not a whole panel.

See all breaker panels

Sources