3M Marine Adhesive Sealant Fast Cure 4200FC, 3 oz White
- Brand:
- 3M
- Part no:
- 05260
Image: www.go2marine.com
Where to buy
Specifications
- Type
- One-part moisture-curing adhesive sealant
- Volume
- 3 oz tube
- Cure time
- Tack-free in 1 hour; typically cures in 24 hours
- Above or below water
- Above and below the waterline
The 3M Marine Adhesive Sealant Fast Cure 4200FC is a one-part, moisture-curing adhesive sealant. It reacts with moisture in the air to bond to wood, gelcoat and fiberglass, forming a watertight, weather-resistant seal on joints and boat hardware. It is suitable for use above and below the waterline. This is the 3 oz tube, part number 05260, and it comes only in white. Tack-free time is quoted at between 60 and 90 minutes, with a typical full cure in 24 hours. Know the limits before you buy: it is not for high-temperature use above 190°F, and it is not recommended for glass, polycarbonate or acrylic windows unless they are also mechanically fastened. Once the inner seal is punctured, use the tube within 24 hours.
Our take
This suits small hardware and joint jobs where you want to get back to work quickly, since it tacks off in about an hour and typically cures in a day. The 3 oz tube fits a one-off job, because an opened tube should be used within 24 hours. Skip it for hot spots above 190°F, and don't trust it alone to hold window glazing. Check the maker's data sheet for a firm tack-free figure.
See all sealants and adhesives
