Skipper's Locker

3M Marine Adhesive Sealant 5200, Black, 3 oz Tube

Brand:
3M
Part no:
05205

Where to buy

Specifications

Type
Polyurethane adhesive sealant
Volume
3 oz tube
Cure time
Tack-free 48 hours; full cure 5-7 days (Hamilton Marine). Fisheries Supply lists tack-free at 30 hours.
Above or below water
Above and below the waterline

3M Marine Adhesive Sealant 5200 is a high-performance polyurethane adhesive and sealant, sold here as a black 3 oz tube. It forms a watertight, weather-resistant, non-shrinking permanent bond on joints and boat hardware, and it holds its strength above and below the waterline. Typical jobs are hull-to-deck joints, thru-hull fittings, portlights and wood to fiberglass. Tensile strength is 700 psi. It stays workable with a trowel or spatula for up to four hours after application. Cure times vary by source: tack-free is listed at 30 hours in one place and 48 hours in another, with full cure in 5 to 7 days. Prime metal surfaces before bonding. Keep it out of high-temperature spots over 190 F, and do not use it on glass, polycarbonate or acrylic windows unless they are also mechanically fastened.

Our take

Buy this for joints you never mean to open again, such as thru-hulls, hull-to-deck seams and portlights. Skip it for anything you may need to remove or re-bed. Practical Sailor found it very hard to remove, and even with removers a thin bonded layer stayed behind. Permanent means permanent.

See all sealants and adhesives

Sources