Skipper's Locker

3M Marine Adhesive Sealant 4200 Fast Cure, White, 10 oz

Brand:
3M
Part no:
06560

Where to buy

Specifications

Type
One-part moisture-curing polyurethane adhesive sealant
Volume
10 oz cartridge
Cure time
Tack-free in 90 minutes; full cure time not stated on source
Above or below water
Above and below the waterline

3M Marine Adhesive Sealant 4200 Fast Cure is a one-part polyurethane adhesive sealant that cures with moisture in the air, so there is nothing to mix. This white 10 oz cartridge carries 3M part number 06560 (MFG # 051135-06560, UPC 051135065600). It forms seals above and below the waterline and bonds to wood, gelcoat and fiberglass. Figures that matter: it is tack-free in 90 minutes, with a stated tensile strength of 300 psi. The bond allows disassembly, so it suits fittings you may want to remove later. For a permanent bond, 3M points you to its 5200 instead. Keep it below 190 F, and do not rely on it alone for glass, polycarbonate or acrylic windows unless they are also mechanically fastened. Test paint compatibility first, and do not paint high-elongation applications. Once the inner seal is punctured, use the cartridge within 24 hours.

Our take

Buy this for boat hardware and fittings you may need to pull off again, especially where the seal sits at or below the waterline. Skip it for permanent bonds, where 3M itself says to use 5200, and for windows without mechanical fasteners. Plan to use the whole cartridge within a day of puncturing it.

See all sealants and adhesives

Sources