Skipper's Locker

Parts by engine / Volvo Penta

Volvo Penta MD1 parts

Diesel inboard · 3 parts listed

Each number comes from a catalogue we name under it. Check it against the part you’re replacing before you buy.

Products for this engine

Confirmed parts come from the engine maker’s or the part maker’s catalogue. Not confirmed parts come from one dealer. Possible fits are other brands sold under exactly one of this engine’s part numbers; we haven’t checked them. Check every part against the one you’re replacing.

Possible fitOther brands sold under exactly this engine’s part numbers. We haven’t checked these; compare with your old part.

Some parts depend on your fuel filter type

An insert sits inside a housing you open. A spin-on filter screws on whole, like an oil filter.

  • Insert
  • Spin-on

Some parts depend on your impeller drive

Take the raw water pump's cover off and look at the shaft: a pin through a hole on early MD1 and MD2 engines, a slot on later ones and the MD1B and MD2B.

  • Pin through a hole in the shaft
  • Slotted shaft

Filters and fluids

Oil filter

Secondary fuel filter

If your fuel filter type is Insert

If your fuel filter type is Spin-on

Cooling

Impeller

If your impeller drive is Pin through a hole in the shaft

  • Volvo Penta 803729

    Confirmed

    Volvo Penta impeller

    Source · same part under other numbers · 1 possible fit

    The same part as Jabsco 4528-0001, per the part makers’ tables.

    Source: Volvo Penta’s catalogue (volvopenta.com), read 2026-11-13. Engine maker's parts catalogue or workshop manual.

    Possible fitOther brands sold as Volvo Penta 803729. We haven’t checked these; compare with your old part.

If your impeller drive is Slotted shaft